Any harm over the teeth surfaces of the sprocket diminishes the lifestyle with the conveyor chain.
With conventional sprockets, considerably worn sprocket teeth have been repaired by teeth padding or even the entire sprocket was replaced. In both case, fix was costly and with teeth padding, accuracy was impaired. We produced new sprockets with detachable teeth for independent substitute. This sprocket is highly rated by our shoppers to the dramatic cost savings in expense and time.
Structure
The teeth is often replaced by two solutions: individual tooth substitute or sectional teeth replacement.
The bolts and nuts utilised for mounting the teeth on to your sprocket are spot-welded to avoid loosening.
The respective structures are illustrated over the correct.
The over photograph and the top suitable illustration demonstrate a sprocket for individual tooth replacement. Since the joint encounter involving the replaced teeth plus the sprocket is formed within a exceptional arc, the bonding accuracy is large along with the sprocket power is enhanced. Furthermore, because the load acting about the mounting bolts is decreased, there may be significantly less probability of loosening. This sprocket building is patented.
There are two sorts of hubs: cast steel and welded sheet steel hubs. Cast steel hubs are utilized for big sprockets acquiring hefty 
loads and welded sheet steel hubs for other applications.
DK Detachable Teeth Sprockets
Tags