one.A connecting link of an O-ring Chain for basic application is pre-coated with grease on the pins. In advance of connection, confirm the grease about the surfaces of pins, and if your level of grease is little, apply grease with bare hands. (If gloves are made use of, the grease will probably be absorbed by the gloves.)
Illustration: When the connecting website link (I) of an O-ring chain for basic application is
shipped, O-rings are fitted on the roots of the pins. In case the O-rings come loose resulting from vibration through transport, refit the O-rings in to the roots of your pins.
In this case, you should definitely return the grease collected in the roots of the pins to the central surfaces from the pins, far more at portion A than at portions B proven within the above illustration. (Portions A is worn due to sliding with all the bushings.)
two.The chain may be most effortlessly linked around the teeth of a sprocket. Engage the backlinks at both ends of your chain with the sprocket teeth and fit connecting pins. If the sprocket can be moved, the chain may also be linked over the loosened side.
3. Connecting method
one.Confirm that O-rings are attached to the roots of your pins.
2.If your level of grease applied over the connecting pins is compact, coat the pins with grease in the central portions.
three.Insert the connecting pins into the bushings from the inner links at the two ends.
4.Verify the grease is applied towards the complete face in the O-ring, and fit the O-ring onto the connecting pins.
five.Insert the connecting pins to the connecting plate and although pressing the connecting plate, set up the spring clip. Confirm irrespective of whether the head (the end without a split) in the spring clip is turned in the feeding path in the chain. (See the following illustration.)
six.You should definitely confirm that the spring clip is securely fitted inside the clip grooves on the connecting pins.
This completes jointing of the connecting website link. Note that grease about the surfaces of connecting pins and O-rings might be removed throughout set up get the job done. In this instance, re-grease utilizing the grease on the surface of the base chain or the grease within the polyethylene bag through which the connecting link was contained.